Rogue processes are processes that have gotten out of control. It is important to be careful with these, as they may impact system performance, reliability, and usability.
Here are some things you can do to help you identify and terminate such processes:
The following command generates a process tree of all of the processes that belong to you on a given server (replace ULID with your university login ID):
Once you have identified the parent process responsible, you can terminate it with the following (replace PID with the process ID of the process you wish to terminate):
To reset your session(s) on any terminal server, SSH into that server and execute the following command:
kill -9 -1
This will terminate all processes owned by you on that server. This is also useful in case you have some rogue processes running you are not sure how to terminate.
Please note that this will also terminate your SSH session!
I ran a program/programs that has/have made the server unresponsive and I cannot reconnect via RDP. What should I do?
If you are attempting to reconnect via RDP, try SSH. You should be able to reconnect and terminate the relevant proccess(es). If you simply want to terminate all your processes, try “pkill -u ULID” or “kill -1 -9”. Note: the latter will also terminate your SSH connection. You should then be able to reconnect via RDP or SSH without issues shortly thereafter.
I cannot log in to one of the terminal servers.
It is possible that the server you are attempting to connect to may be under heavy load. Please try a different terminal server.
When attempting to connect to a terminal server via RDP or SSH, the connection is refused or I cannot ping the server. What are my options?
It’s possible that either you are experiencing network issues. First verify that you’re connected via VPN, if you’re off campus. Second, try to ping a different server on the network, such as vdi.ad.ilstu.edu. If this fails as well, you most likely are experiencing network issues and will need to perform additional troubleshooting. If, however, you are certain a terminal server is unreachable and you are not experiencing network related disruptions, please submit a ticketvia our support site.
My issue isn’t listed, what can I do?
You can always submit a ticket with any questions or suggestions you may have and we will get back to you as soon as possible.
Note: Current CS majors should have access by default. If you are not a CS major and would like access, you will need to submit a request.
The easiest method to access the terminal servers is by visiting “login.it.ilstu.edu” and clicking on the middle Terminal Servers link
It is also possible to connect to the School of IT Linux terminal servers via SSH, SSH with X11 forwarding and RDP. Below are the instructions for each one of these method.
Connection Steps:
1. Connect with the Cisco VPN only if you are off campus
b) Or you can manually Remote Desktop or SSH into the one of the servers as listed in the table below
3. At the login screen, enter your ISU credentials and log in.
Please note: you do not require an active campus network connection to connect to login.it.ilstu.edu but you do need at least a VPN connection to the campus network to connect to any of the terminal servers directly via RDP or SSH.
Terminal Servers Info:
NAME
IP
ASH.AD.ILSTU.EDU
10.110.10.110
ASPEN.AD.ILSTU.EDU
10.110.10.111
BUR.AD.ILSTU.EDU
10.110.10.112
Remote Desktop:
You can use any remote desktop client to connect into either the name or IP of the table listed above.
i. On Windows run remote or Remote Desktop Connection
iii. On Linux, it will depend on the version, but overall we recommend rdesktop
SSH:
SSH is built into the OSX and Linux terminals.
i. On Windows the PuTTY client can be downloaded and used: www.putty.org
a. Enter the IP of the terminal server you wish to connect to, use port 22
When you are done, you can save the connection information by going to “Session” entering a name for the connection (e.g., ash) and clicking “Save” Next time you want to connect to the same server, select the connection you saved and click “Load”.
ii. In OSX, open the terminal and type “ssh -l *ULID* *IP*” where *ULID* and *IP* are your ULID and the IP of the terminal server you wish to connect to or type “ssh ULID@terminalservername.ad.ilstu.edu” for instance.
a. Example: Users-MacBookPro:~ User$ ssh -l myulid 10.21.100.45
SSH with X11 fowarding: This allows you to open GUI applications via a terminal window. This will most likely provide increase performance working with graphical interface applications compared to RDP and is recommended on slower connections.
Directions for Windows users.
i. In addition so step i. from the previous section, you will need to downloadand configure an X11 server on your local machine and enable X11 forwarding in your SSH connection:
1. After downloading and installing the X11 server, launch it. For simplicity, leave all the options to their defaults and click “next” until you are prompted to “Save configuration” or “Finish”. If you save the configuation to your desktop, for instance, you’ll be able to quickly launch your Xserver quickly in the future.
2. Once ready, you should see a a new icon in your notification area/system tray:
3. In PuTTY, expand Connection, SSH, X11 and check “Enable X11 forwarding”.
When you are done, you can save the connection information by going to “Session” entering a name for the connection (e.g., Oak) and clicking “Save” Next time you want to connect to the same server, select the connection you saved and click “Load”.
4. Click “Open” and log in to the terminal server you are connected to. Once you’re logged in, you can launch programs such as Eclipse, Firefox and so on through the terminal and a new window should pop up of the program you launched. The program should behave exactly as it would in a RDP session.
